Tools

We have just the right tools for crimping, bending, folding, seaming or fastening metal. Malco Products is known for quality and innovation, and is the choice of professionals across America!

Malco® Drivers & Sockets

SPECIFICATIONS

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a CONNEXT Quick Change Handle. Hex Driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

Malco® Sheet Metal Double Ender Drill Bits

SPECIFICATIONS

Two points for twice the life, twice the convenience.

Malco® Aviation “Mini” Snips – Left and Right Cutting Offset

SPECIFICATIONS

With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control.

Malco® Offset Aviation Snips: Max2000®

SPECIFICATIONS

Malco’s Max2000 Offset Aviation Snip’s are the premiere option for your vinyl plastic and metal cutting needs. Available in left and right cutting models. Feature superior hardened blade edges for “maximum” cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! And an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.

TurboShear® Automotive – Double Cut Drill Attachment

SPECIFICATIONS

Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD1 TurboShear Drill Attachment fits a corded or cordless drill you already own. The blades of the Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. And you can easily disengage Malco Double-Cut Blades from the cutting path or quickly re-engaged to continue cutting. The long lasting carbon steel blades are also easily replaced on the job.

TurboShear® – Double Cut, Pneumatic

SPECIFICATIONS

Now you can get double-cut performance in a versatile Malco TurboShear. The 2600 RPM (2600 TR/Min) model TSMDA TurboShear Air Tool is compatible with your existing air supply and offers maximum power and speed in a double-cut style shear. The blades of Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. They can also navigate up to 90° outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams. And you can easily disengage Malco Double-Cut Blades from the cutting path or quickly re-engaged to continue cutting. The long lasting carbon steel blades are also easily replaced on the job.

TurboShear® – Corrugated Metal Roof Cutting Drill Attachment

SPECIFICATIONS

Cutting corrugated metal roofing is easier with Malco’s TSCM TurboShear. This attachable shear works better and faster than manual metal roofing shears. The Malco TSCM makes easy cross cuts, fast lengthwise cuts, and precise circular and square outlet cuts. Corrugated metal roofing and common trapezoidal (box) pattern metal roofing panels, can easily be cut with the TSCM. The Elongated blades are made with compact jaws to create a steep 75° offset so that the drill is held at a nearly vertical approach when starting a cut. As these offset blades follow the rising angle of a corrugated or trapezoidal profile, the drill handle or battery pack has clearance to naturally tip downward and still clear the roofing panel surface.

High Leverage Drip Edge Folding Tools

SPECIFICATIONS

Big 24-inch (61 cm) and compact 18-inch (46 cm) Drip Edge Folding Tools make quick bends along the drip edge of flat-pan standing seam metal roofing panels. Two rib-reinforced steel plates are permanently welded together to create two folding seams for making 1-inch (25.4 mm) and 1-1/2-inch (38.1 mm) deep bends in maximum 22-gauge (0.76 mm) steel. A two-post-design, fiberglass reinforced nylon handle offers durable, lightweight strength and high leverage for working overhead or on a bench.

3-Station Edge Roller

SPECIFICATIONS

The ER3 3-Station Metal Edge Roller ensures a uniform bend along the entire length of roofing material. The tool quickly adjusts for making 5/8” to 4” (15.9-102 mm) bends in 29-22 gauge (0.36-0.76 mm) steel. The center roller station of the ER3 Metal Edge Roller features a precision English/Metric depth gauge on one shaft leg that, when locked in place at desired setting, accurately aligns the depth of all roller stations. Large, comfortable adjustment knobs hold depth setting securely. Malco’s ER3 Metal Edge Roller also adjusts for making curved bends! The center roller station is independently adjustable, with outer roller stations retracted and locked, to allow for bending on a curve. Made for durability on the field to create fast crisp, clean bends, the Malco ER3 is a must have metal roofing tool!

Circular Saw Blade: Steel

SPECIFICATIONS

Specially formulated, tough c-6 carbide tipped blade fits all popular brands of portable circular saws. Lasts up to 30 times longer than abrasive disks for cutting unhardened ferrous metal. Makes true, flat cuts in standing seam metal roofing and metal building panels without burning paint or protective coatings. Also makes clean cuts in metal studs, light angle iron and thin walled pipe. Available in one model, MCCB7, sized at 7-1/4 in. (184 mm).

Tools

Malco® Drivers & Sockets

Malco® Sheet Metal Double Ender Drill Bits

Malco® Aviation “Mini” Snips – Left and Right Cutting Offset

Malco® Offset Aviation Snips: Max2000®

TurboShear® Automotive – Double Cut Drill Attachment

TurboShear® – Double Cut, Pneumatic

TurboShear® – Corrugated Metal Roof Cutting Drill Attachment

High Leverage Drip Edge Folding Tools

3-Station Edge Roller

Circular Saw Blade: Steel

Spec Sheets & Color Charts

Get a Quote

The Ultimate Guide to Metal Roofs!